Maintenance Technician II
GAF is hiring for Maintenance Technician II in Newton, KS. Mid level, $41 an hour stated. First seen November 13, 2026, posted 2 times; open as of November 19, 2026. Jobs taken straight from company career pages — no aggregator in between.
Save to applyFree forever. No commitment, no card required.
- Company
- GAF
- Where
- Newton, KS
- Level
- Mid
- Pay stated
- $41 an hour
- First seen
- November 13, 2026
- Postings
- 2
- Listed via
- Workday
- Open for
- 5 days, as of November 19, 2026
Applying to this one?
See how well you fit, before you apply
Save it to your board. Add your résumé once, and Destava shows where you are strong, what is missing and how to pitch yourself, then tailors your résumé to this posting.
- Found it
- Save it
- See your fit
Free forever. No commitment, no card required.
About this job
This is a maintenance technician role at GAF's new shingle plant in Newton, KS. You'll handle advanced mechanical, electrical, and facility upkeep, working under the Maintenance Supervisor. The job may require up to 50% travel during startup and commissioning, and you must be willing to work overtime and weekends as needed.
Schedule: willing to work overtime and weekends when necessary
Responsibilities
- provide advanced maintenance support and preventive maintenance for plant equipment
- troubleshoot and work from blueprints/schematics for machine drives and conveying systems in high-production line
- complete assigned work orders timely, documenting in Maximo and closing out
- perform root cause failure analysis on manufacturing and maintenance equipment
- read instructions, blueprints, manuals; use meters, hand tools, shop equipment
- perform skilled maintenance and repair of mechanical, electrical, HVAC, and other physical structures
- may drywall, plaster, lay bricks, or repair plumbing fixtures
- perform millwright work: align pump/motor, install sheaves/belts, check alignment and belt tension; troubleshoot/repair/replace power transmissions, pneumatic and hydraulic systems, weld and assemble parts
- perform all welding phases including MIG and rod
- work on pipe systems: repair, modify, install
- troubleshoot process control ladder logic and VFDs
- perform preventive analysis testing: vibration analysis, lubrication, infrared thermography, ultrasound
- maintain proper lube storage including 5S standard storage
- perform preventive and predictive maintenance assignments
- work with maintenance team on mechanical/electrical projects, work orders, line calls
- use knowledge of 480v systems and controls, read multimeter; experience with Allen Bradley ControlLogix / RSLogix 5000
- operate manual mill and lathe
- involved in planned and unplanned maintenance work for daily and outage jobs
- provide on-the-spot equipment expertise and technical guidance
- enhance communication and coordination between maintenance and other departments, especially production
- provide input to maintenance planner and storeroom personnel on labor, parts, priorities, methods
- ensure safety, quality, timeliness, cost, thoroughness of work
- respond as first call-in contact for maintenance emergencies
- participate in safety, continuous improvement, and 5S initiatives
- provide safe workplace through adherence to safety policy, housekeeping, training standards
- stay in compliance with safety policies, conduct inspections, resolve or communicate deficiencies
- continue to grow, become well-trained, involved, committed to meeting department expectations including safety requirements
Requirements
- High school diploma or GED
- at least 3 years of industrial or manufacturing maintenance experience
- 3+ years in high-volume manufacturing, preferably continuous process
- troubleshoot and repair mechanical power trains, hydraulic and pneumatic equipment, weld and assemble parts
- working knowledge of 480v systems and controls, use and read a multimeter
- operate a manual mill and lathe
- advanced knowledge of mechanical and facility repair and maintenance
- read instructions, blueprints, manuals; use meters, hand tools, shop equipment
- perform millwright work: align pump/motor, install sheaves/belts, check alignment and belt tension
- perform all welding phases including MIG and rod; repair, modify, fabricate, install pipe systems
- troubleshoot variable frequency drives (VFDs)
- perform preventive and predictive maintenance
- work with maintenance team on mechanical/electrical projects, work orders, line calls
- good safety and attendance record
- willing to work overtime and weekends when necessary
- physical demands: frequently stand, move, lift, carry, push, pull, climb, stoop, kneel, crouch, crawl, grasp, hear, do repetitive motions, coordinate; constantly reach and handle; occasionally sit, balance, talk; rarely feel
- working conditions: frequently exposed to extreme cold/heat, humidity, wetness, noise, hazards, temperature changes, vibration
- occasional travel for conferences, site visits, professional development; up to 50% travel initially for startup/commissioning
Nice to have
- Associate's degree
- experience in continuous process high-volume manufacturing
- Allen Bradley ControlLogix / RSLogix 5000 experience
- NFPA 70e certificate
- industrial maintenance background
Benefits
- medical, dental, and vision insurance
- family-building benefits
- 401K with employer match
- wellness program, free financial coaching, referral program, product rebates
- internal training and tuition reimbursement
- Employee Resource Groups
- competitive salary, benefits, 401k, vacation packages for full-time permanent positions
Read more and apply on GAF's site
Questions about this job
When was this Maintenance Technician II job at GAF posted?
November 13, 2026
Destava first saw it on November 13, 2026, on GAF's own careers page (Workday). GAF has listed this job at this place 2 times in the last 90 days, counting the ones taken down.
Is GAF still accepting applications for it?
Open as of November 19, 2026
It was open on GAF's own site when Destava last read it, on November 19, 2026, 5 days after we first saw it. When the company takes it down, this page says the job has closed.
How do I apply for Maintenance Technician II at GAF?
On GAF's own site
On GAF's own site, at gafsgi.wd5.myworkdayjobs.com: open the posting. Destava does not take the application. Save the job to your Destava board to track it, see how well you fit and tailor your résumé to it.
Is this GAF job posting legit?
Listed on GAF's own careers page
Destava read it on GAF's own careers page at gafsgi.wd5.myworkdayjobs.com, run on Workday, not on a job board. First seen November 13, 2026, posted 2 times. Apply on the company's own site, and never pay to apply for a job.
What does this job pay?
$41 an hour
The posting states $41 an hour.
How many maintenance and repair workers, general jobs are open in Kansas City?
214 open
214 open, 61 of them new this week, at 122 companies: see them all.
More jobs like this
General Service Technician / Mechanic | Weekends Off | Blue Valley
Save to applyMaintenance Technician
Save to applyService Technician
Save to applyMaintenance Technician Trainee (11pm- 7am M-F)
Save to apply
See all 214 Maintenance and Repair Workers, General jobs in Kansas City
A search agent finds the jobs this list misses: the ones that mean the same without the same words. Have Destava watch for maintenance technician ii jobs in Newton, KS, new matches every morning on your own account.
With Destava: Save to apply · Tailor my résumé · Write a cover letter
This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA.