Technician 3, Production
Semtech_Canada_Corporation is hiring for Technician 3, Production in USA - Alhambra, CA. On-site, Senior level, $27–$39 an hour stated. First seen November 15, 2026; open as of November 19, 2026. Jobs taken straight from company career pages — no aggregator in between.
Save to applyFree forever. No commitment, no card required.
- Company
- Semtech_Canada_Corporation
- Where
- USA - Alhambra, CA
- Arrangement
- On-site
- Level
- Senior
- Pay stated
- $27–$39 an hour
- First seen
- November 15, 2026
- Listed via
- Workday
- Open for
- 4 days, as of November 19, 2026
Applying to this one?
See how well you fit, before you apply
Save it to your board. Add your résumé once, and Destava shows where you are strong, what is missing and how to pitch yourself, then tailors your résumé to this posting.
- Found it
- Save it
- See your fit
Free forever. No commitment, no card required.
About this job
This role involves running and maintaining wafer fabrication processes for InP-based photonic devices like DFB lasers and gain chips. It requires deep hands-on experience in III-V semiconductor processing, especially holographic grating, metallization, and etching. The technician will support multiple fabrication modules and ensure stable, repeatable processes and high yield in a cleanroom.
Schedule: Onsite
Responsibilities
- Create gratings for DFB lasers using holographic lithography.
- Set up and align holographic exposure systems for precise patterns.
- Measure grating pitch, depth, and uniformity with AFM.
- Analyze grating data to ensure consistency and repeatability.
- Maintain and calibrate holographic and AFM equipment.
- Fix grating defects and process variations.
- Run e-beam evaporation for metal deposition.
- Deposit metal stacks for p-contacts, n-contacts, and interconnects.
- Perform metal lift-off and inspect pattern quality.
- Check film thickness and deposition uniformity.
- Document metallization processes and help troubleshoot issues.
- Etch InP and other III-V materials using wet chemicals.
- Operate RIE or ICP dry etch systems for pattern transfer.
- Monitor etch rates, profiles, and uniformity.
- Follow chemical safety procedures and handle gases and chemicals properly.
- Support etch process optimization and troubleshooting.
- Support photolithography including resist coating, exposure, and development.
- Help with mask alignment and lithography setup.
- Use SEM for pattern inspection and process qualification.
- Perform basic inspections to ensure pattern quality.
- Work with process engineers to keep lithography stable.
- Own assigned process modules in the fab line.
- Monitor tool performance, uptime, and process stability.
- Help with preventive maintenance and equipment troubleshooting.
- Keep process documentation and support continuous improvement.
Requirements
- At least 10 years of hands-on InP wafer fabrication experience.
- Direct experience with DFB laser and gain chip fabrication in a compound semiconductor environment.
- Strong expertise in InP-based III-V semiconductor processes.
- Hands-on experience with DFB grating using holographic lithography.
- Proficiency in AFM for grating and surface characterization.
- Experience with e-beam evaporation and metallization lift-off.
- Strong knowledge of wet chemical etching and plasma dry etching of InP.
- Ability to manage multiple wafer fab process modules.
- Strong troubleshooting and problem-solving skills in a cleanroom.
- Familiarity with semiconductor manufacturing documentation, safety, and process control.
Nice to have
- Associate's degree preferred.
Read more and apply on Semtech_Canada_Corporation's site
Questions about this job
When was this Technician 3, Production job at Semtech_Canada_Corporation posted?
November 15, 2026
Destava first saw it on November 15, 2026, on Semtech_Canada_Corporation's own careers page (Workday).
Is Semtech_Canada_Corporation still accepting applications for it?
Open as of November 19, 2026
It was open on Semtech_Canada_Corporation's own site when Destava last read it, on November 19, 2026, 4 days after we first saw it. When the company takes it down, this page says the job has closed.
How do I apply for Technician 3, Production at Semtech_Canada_Corporation?
On Semtech_Canada_Corporation's own site
On Semtech_Canada_Corporation's own site, at semtech.wd1.myworkdayjobs.com: open the posting. Destava does not take the application. Save the job to your Destava board to track it, see how well you fit and tailor your résumé to it.
Is this Semtech_Canada_Corporation job posting legit?
Listed on Semtech_Canada_Corporation's own careers page
Destava read it on Semtech_Canada_Corporation's own careers page at semtech.wd1.myworkdayjobs.com, run on Workday, not on a job board. First seen November 15, 2026. Apply on the company's own site, and never pay to apply for a job.
What does this job pay?
$27–$39 an hour
The posting states $27–$39 an hour.
Is this job remote?
No, on site
No. The posting says the work is on site in USA - Alhambra, CA.
How many production workers, all other jobs are open in Los Angeles?
122 open
122 open, 37 of them new this week, at 75 companies: see them all.
More jobs like this
Injection Utility Worker
Save to applyInjection Utility Worker
Save to applyProduction Associate
Save to applyBlanket Technician (Multi-Layer Insulation)
Save to apply
See all 122 Production Workers, All Other jobs in Los Angeles
A search agent finds the jobs this list misses: the ones that mean the same without the same words. Have Destava watch for technician 3, production jobs in USA - Alhambra, CA, new matches every morning on your own account.
With Destava: Save to apply · Tailor my résumé · Write a cover letter
This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA.