Destava

Python CNC Plasma Operator

Red Dot Corp is hiring for Python CNC Plasma Operator in Mineola, TX. Mid level. First seen November 17, 2026; open as of November 18, 2026. Jobs taken straight from company career pages — no aggregator in between.

Save to applyFree forever. No commitment, no card required.

Company
Red Dot Corp
Where
Mineola, TX, US
Level
Mid
First seen
November 17, 2026
Listed via
Paylocity
Open for
1 day, as of November 18, 2026

About this job

This role runs a Python CNC plasma cutter to process structural steel parts for fabrication. The operator handles setup, program verification, cutting, quality checks, and staging of finished pieces. The position reports within the manufacturing team and works a full shift.

Responsibilities

  • Set up and run the Python CNC plasma cutter on structural steel per production needs.
  • Review schedules, work orders, nesting data, cut lists, and shop documents to plan work.
  • Load, pick, and confirm the right CNC program or cutting file before starting.
  • Check that the loaded material matches the required type, grade, thickness, and size.
  • Position steel on the machine using overhead cranes and rigging gear.
  • Configure the machine and verify cutting settings for the material type and thickness.
  • Inspect consumables, torch parts, tips, and related equipment before and during cutting.
  • Start cutting programs and watch the machine through the whole process.
  • Watch cut quality and make approved adjustments to keep it correct.
  • Watch for faults, wear, material shift, program errors, or other issues affecting output.
  • Stop the machine for unsafe conditions, equipment faults, wrong programs, or quality problems.
  • Check finished parts against documents for size, hole placement, count, orientation, and cut quality.
  • Use tape measures, squares, calipers, and other tools to verify parts.
  • Flag and report parts that fail size or quality checks.
  • Label, sort, group, and stage finished parts for the next step.
  • Keep traceability and proper identification of material and parts.
  • Remove scrap and remnants, and label any reusable material.
  • Work with Material Handling to keep raw material coming and finished parts moving out.
  • Tell the supervisor about missing material, program issues, drawing errors, equipment faults, or delays.
  • Coordinate with Production Control, Nesting, and others to fix cutting or programming problems.
  • Log production data including completed work, counts, scrap, downtime, and other required info.
  • Do routine operator-level maintenance and cleaning on the CNC plasma machine.
  • Inspect and replace plasma consumables within the operator's scope.
  • Keep the cutting table, machine area, controls, and workspace clean and organized.
  • Report mechanical, electrical, CNC, or plasma-system issues that need maintenance.
  • Follow startup and shutdown procedures.
  • Run overhead cranes, hoists, chains, slings, and other lifting devices safely.
  • Follow all safety rules, including PPE, material handling, machine operation, and lockout/tagout.
  • Support production, safety, quality, and continuous-improvement efforts.
  • Perform other tasks as assigned to support manufacturing.

Requirements

  • Ability to operate or learn CNC-controlled manufacturing equipment.
  • Ability to read structural steel shop drawings, cut lists, nesting sheets, and production documents.
  • Ability to understand basic CNC programs and machine controls.
  • Ability to read a tape measure and use common measuring tools.
  • Ability to identify structural steel sizes and thicknesses.
  • Ability to spot poor cut quality and decide when adjustments or maintenance are needed.
  • Ability to safely run overhead cranes and lifting equipment.
  • Ability to rig and handle structural steel properly.
  • Basic computer skills.
  • Strong attention to detail.
  • Ability to work independently while keeping production priorities.
  • Ability to communicate with Production, Nesting, Material Handling, Quality, and Maintenance staff.
  • Ability to work safely around CNC machinery, plasma cutting, moving steel, and overhead cranes.
  • Basic computer experience.
  • Ability to stand and walk for extended periods.
  • Ability to bend, stoop, kneel, reach, and climb.
  • Ability to lift and carry up to 50 pounds.
  • Ability to handle plasma consumables, tools, and steel parts.
  • Ability to work safely around large steel members and moving equipment.
  • Ability to work in a noisy industrial environment.
  • Ability to work around heat, sparks, fumes, dust, and plasma cutting while wearing required PPE.

Nice to have

  • Understanding of CNC plasma cutting processes.
  • Understanding of plasma cutting consumables and basic cutting parameters.
  • Previous CNC machine-operation experience.
  • CNC plasma cutting experience.
  • Structural steel fabrication or manufacturing experience.
  • Experience reading shop drawings or production prints.
  • Overhead crane and rigging experience.

Read more and apply on Red Dot Corp's site

Questions about this job

When was this Python CNC Plasma Operator job at Red Dot Corp posted?

Destava first saw it on November 17, 2026, on Red Dot Corp's own careers page (Paylocity).

Is Red Dot Corp still accepting applications for it?

It was open on Red Dot Corp's own site when Destava last read it, on November 18, 2026, 1 day after we first saw it. When the company takes it down, this page says the job has closed.

How do I apply for Python CNC Plasma Operator at Red Dot Corp?

On Red Dot Corp's own site, at recruiting.paylocity.com: open the posting. Destava does not take the application. Save the job to your Destava board to track it, see how well you fit and tailor your résumé to it.

Is this Red Dot Corp job posting legit?

Destava read it on Red Dot Corp's own careers page at recruiting.paylocity.com, run on Paylocity, not on a job board. First seen November 17, 2026. Apply on the company's own site, and never pay to apply for a job.

What other jobs is Red Dot Corp hiring for?

Red Dot Corp has 18 open postings on its own site: see all jobs at Red Dot Corp.

How many computer numerically controlled tool operators jobs are open?

1,374 open, 366 of them new this week, at 535 companies: see them all.

Applying to this one?

See how well you fit, before you apply

Save it to your board. Add your résumé once, and Destava shows where you are strong, what is missing and how to pitch yourself, then tailors your résumé to this posting.

  1. Found it
  2. Save it
  3. See your fit

Free forever. No commitment, no card required.

Or apply on Red Dot Corp's own site

With Destava: Save to apply · Tailor my résumé · Write a cover letter

This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA.