Instrumentation, Electrical, and Control Technician I
Ingredion Incorporated (NA-US) is hiring for Instrumentation, Electrical, and Control Technician I in Cedar Rapids, IA. Junior level, $38.09 an hour stated. First seen November 13, 2026; open as of November 18, 2026. Jobs taken straight from company career pages — no aggregator in between.
Save to applyFree forever. No commitment, no card required.
- Company
- Ingredion Incorporated (NA-US)
- Where
- Cedar Rapids, IA
- Level
- Junior
- Pay stated
- $38.09 an hour
- First seen
- November 13, 2026
- Listed via
- Workday
- Open for
- 5 days, as of November 18, 2026
Applying to this one?
See how well you fit, before you apply
Save it to your board. Add your résumé once, and Destava shows where you are strong, what is missing and how to pitch yourself, then tailors your résumé to this posting.
- Found it
- Save it
- See your fit
Free forever. No commitment, no card required.
About this job
This position manages the setup, repair, and care of electrical, instrumentation, and control systems plant-wide, aiding production, quality, and process safety. It entails routine checks, fault identification, and failure analysis for root causes. The workweek is Monday through Friday, with an hourly wage of $38.09.
Schedule: Monday to Friday
Responsibilities
- Connect, diagnose, and confirm rotation for single- and three-phase motors up to 10HP.
- Diagnose standard control circuits (24VDC, 120VAC, etc.) and process signals (0-10VDC, 4-20mA, etc.).
- Set up, repair, and service industrial and motor control components like sensors, operators, indicators, and electro-mechanical relays.
- Diagnose and swap out consumable parts (fuses, overloads, etc.) on live (≤120VAC and ≤24VDC) and dead (>120VAC and >24VDC) circuits.
- Set up, repair, and service application-specific controllers like smart relays, smart timers, process meters, scale controllers, and CEMs.
- Check and diagnose discrete and analog signals at every location, including between the control system interface and the field device.
- Carry out calibrations (span, trim, etc.) and setpoint changes on field devices not needing a field communicator or specialty interface.
- Diagnose and service pneumatic and electro-pneumatic equipment and systems for control valves and other pneumatically controlled hardware.
- Work with equipment- or system-specific vendors and contractors for routine inspections and maintenance.
- Review the maintenance program (including job plans and procedures) and suggest enhancements.
- Know and follow all OSHA, state/provincial, and local codes, and join plant training and safety programs.
Requirements
- Demonstrated capability to work safely on or near electrical equipment or systems in an industrial setting.
- Strong grasp and practical familiarity with equipment and hardware typical in industrial electrical control systems.
- Solid basic knowledge of process control systems, instrumentation hardware, and control devices, including their principles.
- Excellent analytical and critical-thinking skills, with proven diagnostic abilities for industrial and process control systems.
- Proven skill in accurately interpreting electrical schematics, P&IDs, site maps/directions, instruction manuals, and written instructions.
- Readiness to cooperate with others and assist in other areas when necessary.
- Capability to work in potentially noisy and odorous settings, varied physical environments, or different weather conditions.
- Must be able to navigate processing areas, lift and carry 50 pounds, stand and walk for extended periods, climb stairs and ladders, bend, reach, push, pull, and enter tanks.
- At least a High School Diploma or GED.
- Must hold an Associate’s Degree from an accredited program relevant to the role AND at least three years’ experience in a maintenance or maintenance-support role in an industrial environment.
- Alternatively, must have completed a series of technical trainings (collectively providing training and education equivalent to an Associate’s Degree) and have three to five years of experience in a maintenance or maintenance-support role in an industrial environment.
- Or, five to seven years of on-the-job training in a maintenance or maintenance-support role in an industrial environment; in this case, artifacts, documentation, and other supporting details must be provided to verify minimum requirements are met.
- Must be able to show proof of NCCER Instrumentation Level 1 Certification.
- Must be able to show proof of current NFPA70E certification.
- Read, write, and speak English and function in a team setting.
- Computer proficient with prior use of a computerized maintenance management system (CMMS).
- Must be available to work any day of the week.
- Must have a basic grasp of OSHA regulations.
Nice to have
- SAP experience is a plus.
- Familiarity with Good Manufacturing Practice and Food Safety is a plus.
Benefits
- Medical (HSA), Dental, and Vision coverage, starting the 1st of the month after hire.
- Two weeks of annual vacation.
- 401K through Fidelity, with 3% match plus 3.5% employer contribution, totaling up to 6.5%.
- Safety shoe allowance of $250.
- Quarterly incentive pay.
- Health, life, and disability coverage.
- Health savings account option.
- Educational cost reimbursement.
- Employee appreciation program with tailored rewards.
- Employee discount program for products, services, and travel.
Read more and apply on Ingredion Incorporated (NA-US)'s site
Questions about this job
When was this Instrumentation, Electrical, and Control Technician I job at Ingredion Incorporated (NA-US) posted?
November 13, 2026
Destava first saw it on November 13, 2026, on Ingredion Incorporated (NA-US)'s own careers page (Workday).
Is Ingredion Incorporated (NA-US) still accepting applications for it?
Open as of November 18, 2026
It was open on Ingredion Incorporated (NA-US)'s own site when Destava last read it, on November 18, 2026, 5 days after we first saw it. When the company takes it down, this page says the job has closed.
How do I apply for Instrumentation, Electrical, and Control Technician I at Ingredion Incorporated (NA-US)?
On Ingredion Incorporated (NA-US)'s own site
On Ingredion Incorporated (NA-US)'s own site, at ingredion.wd1.myworkdayjobs.com: open the posting. Destava does not take the application. Save the job to your Destava board to track it, see how well you fit and tailor your résumé to it.
Is this Ingredion Incorporated (NA-US) job posting legit?
Listed on Ingredion Incorporated (NA-US)'s own careers page
Destava read it on Ingredion Incorporated (NA-US)'s own careers page at ingredion.wd1.myworkdayjobs.com, run on Workday, not on a job board. First seen November 13, 2026. Apply on the company's own site, and never pay to apply for a job.
What does this job pay?
$38.09 an hour
The posting states $38.09 an hour.
How many electrical and electronic engineering technologists and technicians jobs are open?
2,601 open
2,601 open, 682 of them new this week, at 906 companies: see them all.
More jobs like this
Space Photovoltaics Test & Measurement Laboratory Technician
Save to applyElectronic Technician
Save to applyTram Electrical Technician
Save to applyLehrling Elektroniker:in (all genders)
Save to apply
See all 2,601 Electrical and Electronic Engineering Technologists and Technicians jobs
A search agent finds the jobs this list misses: the ones that mean the same without the same words. Have Destava watch for instrumentation, electrical, and control technician i jobs in Cedar Rapids, IA, new matches every morning on your own account.
With Destava: Save to apply · Tailor my résumé · Write a cover letter
This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA.