Destava

Mechanical Technician 1

IKO is hiring for Mechanical Technician 1 in Chester - Cedarhurst. On-site, Junior level. First seen November 13, 2026; open as of November 19, 2026. Jobs taken straight from company career pages — no aggregator in between.

Save to applyFree forever. No commitment, no card required.

Company
IKO
Where
Chester - Cedarhurst
Arrangement
On-site
Level
Junior
First seen
November 13, 2026
Listed via
Workday
Open for
6 days, as of November 19, 2026

Applying to this one?

See how well you fit, before you apply

Save it to your board. Add your résumé once, and Destava shows where you are strong, what is missing and how to pitch yourself, then tailors your résumé to this posting.

  1. Found it
  2. Save it
  3. See your fit

Free forever. No commitment, no card required.

Or apply on IKO's own site

About this job

This is a Mechanical Technician 1 role at IKO's Chester-Cedarhurst site, a roofing materials manufacturer. The job involves maintenance, repair, and safety duties in a plant environment. Technicians must master all listed skills within 18 months and be flexible with shift changes.

Schedule: Flexible to changing shift times when needed.

Responsibilities

  • Follow the IKO 7 Life Critical Program while on site.
  • Adopt IKO's values of Humility, Integrity, Agility, Long-Term thinking, Performance, and Knowledge Sharing.
  • Complete preventive maintenance, repair maintenance, and training tasks consistently and accurately.
  • Keep the maintenance shop and production work areas clean.
  • Use metric and standard hand tools safely to dismantle and reassemble equipment.
  • Maintain a company-supplied tool chest with small hand tools up to 1" or 24mm using an annual tool allowance.
  • Use Maximo CMMS and Modula storeroom racking systems.
  • Show work history of separating problem effects from causes.
  • Show work history of sharing information by showing or explaining, and maintaining confidentiality when appropriate.
  • Understand and repair soft foot and coupling misalignments.
  • Identify pipe sizes, air filters, regulators, and lubricators for pneumatics.
  • Install roller chains, sprockets, pulleys, bushings, and drive belts with proper tensioning.
  • Replace shafts and remove/replace bearings using pullers or necessary tools.
  • Understand necessity of lubrication for rotating equipment.
  • Check, drain, and replace gearbox lubricant levels.
  • Use torque wrench, dial indicator, inside/outside micrometer (vernier scale) for measurements.
  • Handle compressed gas cylinders safely.
  • Operate oxy/acetylene torch for heating and cutting.
  • Select proper tip size for acetylene cutting and brazing.
  • Use drill press, bandsaw, bench grinder, torque wrench, and other basic hand and power tools.
  • Use tap drill chart to tap holes at 95%, 75%, and 50% thread contact in carbon and stainless steel.
  • Start, stop, and check air compressors and chillers.
  • Heat and install straight bore bearings, check bench clearance, and set tapered bore angular contact bearings.
  • Flat weld with 6011 and 304L rod; MIG weld carbon and stainless steel.
  • Reset plant fire alarm systems and troubleshoot hydrant pressure with booster pumps.
  • Show proficiency in basic rigging; obtain forklift and articulating/scissors lift certifications.
  • Master all listed responsibilities and qualifications within 18 months, except Life Critical Program and core values which must be understood within first 5 days.
  • Be flexible to changing shift times when needed.
  • Walk throughout plant, climb ladders, twist, and bend routinely.
  • Properly assemble, clean, repair, and reassemble complex mechanical devices.

Requirements

  • 3-5 years' experience with Lock-Out-Tag-Out procedures.
  • Willing to wear PPE Arc Rated clothing up to 8 cal/cm2.
  • 3-5 years' experience in manufacturing industry (preferably continuous manufacturing).
  • Able to walk throughout plant, climb ladders, twist, and bend routinely.
  • Able to properly assemble, clean, repair, and reassemble complex mechanical devices.
  • Able to measure parts and rough sketch/describe.
  • Able to lift and move up to 75 pounds routinely using proper lifting techniques.
  • Able to read assembly drawings and P&IDs.
  • Demonstrate work history of going beyond job boundaries and assuring safety for personnel and equipment.
  • Communication skills.
  • Knowledge of general plant layout.
  • Knowledge of fire protection systems and proper fire extinguisher use.

Benefits

  • Competitive compensation
  • Health care
  • Progressive and challenging workplace
  • Commitment to teamwork and integrity

Read more and apply on IKO's site

Questions about this job

When was this Mechanical Technician 1 job at IKO posted?

November 13, 2026

Destava first saw it on November 13, 2026, on IKO's own careers page (Workday).

Is IKO still accepting applications for it?

Open as of November 19, 2026

It was open on IKO's own site when Destava last read it, on November 19, 2026, 6 days after we first saw it. When the company takes it down, this page says the job has closed.

How do I apply for Mechanical Technician 1 at IKO?

On IKO's own site

On IKO's own site, at iko.wd3.myworkdayjobs.com: open the posting. Destava does not take the application. Save the job to your Destava board to track it, see how well you fit and tailor your résumé to it.

Is this IKO job posting legit?

Listed on IKO's own careers page

Destava read it on IKO's own careers page at iko.wd3.myworkdayjobs.com, run on Workday, not on a job board. First seen November 13, 2026. Apply on the company's own site, and never pay to apply for a job.

Is this job remote?

No, on site

No. The posting says the work is on site in Chester - Cedarhurst.

How many mechanical engineering technologists and technicians jobs are open in New York?

12 open

12 open, 3 of them new this week, at 9 companies: see them all.

With Destava: Save to apply · Tailor my résumé · Write a cover letter

This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA.