Industrial Maintenance Technician
Haier US Appliance Solutions is hiring for Industrial Maintenance Technician in USA, Selmer, TN. Mid level. First seen November 14, 2026; open as of November 19, 2026. Jobs taken straight from company career pages — no aggregator in between.
Save to applyFree forever. No commitment, no card required.
- Company
- Haier US Appliance Solutions
- Where
- USA, Selmer, TN
- Level
- Mid
- First seen
- November 14, 2026
- Listed via
- Workday
- Open for
- 5 days, as of November 19, 2026
Applying to this one?
See how well you fit, before you apply
Save it to your board. Add your résumé once, and Destava shows where you are strong, what is missing and how to pitch yourself, then tailors your résumé to this posting.
- Found it
- Save it
- See your fit
Free forever. No commitment, no card required.
About this job
This is an industrial maintenance role supporting manufacturing operations to keep equipment reliable and running. It involves setup, troubleshooting, repair, and preventive maintenance on mechanical, electrical, pneumatic, and hydraulic systems. The position is based in Selmer, TN, and may require shift changes, overtime, and weekend work.
Schedule: May require shift changes, overtime, and weekends.
Responsibilities
- Follow safe work methods and use required protective equipment, including LOTO and machine guards.
- Maintain, troubleshoot, repair, and improve hydraulic, pneumatic, electrical, and mechanical equipment.
- Perform preventive maintenance.
- Complete shop records and use reporting systems per procedures.
- Respond quickly to maintenance requests from leadership and operations teams.
- Keep maintenance work areas clean and organized.
- Operate motorized equipment like scissor lifts, JLGs, and fork trucks (must pass Monogram’s certification).
- Use a wide range of powered, hand, and vibratory tools.
- Fill out shift reports.
- Handle physical demands: frequent lifting, standing, walking, reaching, pushing/pulling, grasping, pinching, fine motor dexterity, wrist flexion/extension; occasional sitting, overhead/floor reaching, bending, stooping, squatting, crouching, kneeling, crawling, climbing, pivoting, twisting, shoulder
- Work with parts/equipment that may be hot and/or wet.
- Work in a loud/noisy environment.
- Perform other duties as assigned.
Requirements
- High school diploma, GED, or equivalent.
- Certified Journeyman with 2/5 years in Electrical/Industrial Maintenance, or an associate’s degree in that field with at least 2/5 years of current hands-on experience.
- Experience with 480V, 220V, 120V, and low volt DC electrical controls and systems.
- Ability to read electrical, pneumatic, and hydraulic schematics.
- Mechanical aptitude to understand basic mechanical concepts.
- Ability to work in loud/noisy environments.
- Willingness to change shifts, work overtime and weekends.
- Ability to work with hot, cold, and/or wet parts/equipment.
- Ability to work outside in all weather and at heights.
- Ability to use powered, hand, and vibratory tools.
- Ability to perform essential functions with or without accommodation, including prolonged standing, frequent handling, walking, reaching, pushing/pulling, grasping/squeezing, pinching, fine motor dexterity, neck flexion, using air tools, overhead/shoulder/knee/floor reaching, bending, stooping, squa
- Ability to lift/carry at least 50 lbs and push/pull 75 lbf.
Nice to have
- PLC experience, understanding logic, minor editing and programming changes.
- Experience with PLC logic, process flow diagrams, instrument flow diagrams, and/or P&ID drawings.
- Experience with HMIs, analog/digital AC/DC drive systems, pneumatic/hydraulic systems.
- Ability to diagnose and troubleshoot VFDs and servo drives, set/adjust parameters, and replace devices.
- Ability to operate and monitor machines, interpret operation and maintenance documentation.
- Ability to perform machine maintenance procedures and equipment lubrication.
- Ability to select proper hand tools and move, handle, and store materials.
- Systems troubleshooting methodologies.
- Ability to prepare parts for welding, use acetylene torch and SMAW welder, do basic welding and pass inspection, use plasma cutter.
- Experience with 480V, 220V, 120V, and low volt DC electrical controls and schematics.
- Ability to use dimensional tools, align and adjust gear drives.
- Ability to install, align, and adjust pillow block bearings.
- Ability to interpret fluid power schematics, start/stop hydraulic systems, adjust pressure, adjust actuator speed, service filters/fluid, install/test hydraulic components.
- Ability to use predictive maintenance devices (ultrasound/thermography).
- Ability to adjust pneumatic pressure, actuator speed, service filters/lubricators, start/stop reciprocating air compressors, install/test pneumatic components.
- Ability to interpret piping schematics, select materials, prepare, measure, and install piping systems.
Read more and apply on Haier US Appliance Solutions' site
Questions about this job
When was this Industrial Maintenance Technician job at Haier US Appliance Solutions posted?
November 14, 2026
Destava first saw it on November 14, 2026, on Haier US Appliance Solutions' own careers page (Workday).
Is Haier US Appliance Solutions still accepting applications for it?
Open as of November 19, 2026
It was open on Haier US Appliance Solutions' own site when Destava last read it, on November 19, 2026, 5 days after we first saw it. When the company takes it down, this page says the job has closed.
How do I apply for Industrial Maintenance Technician at Haier US Appliance Solutions?
On Haier US Appliance Solutions' own site
On Haier US Appliance Solutions' own site, at haier.wd3.myworkdayjobs.com: open the posting. Destava does not take the application. Save the job to your Destava board to track it, see how well you fit and tailor your résumé to it.
Is this Haier US Appliance Solutions job posting legit?
Listed on Haier US Appliance Solutions' own careers page
Destava read it on Haier US Appliance Solutions' own careers page at haier.wd3.myworkdayjobs.com, run on Workday, not on a job board. First seen November 14, 2026. Apply on the company's own site, and never pay to apply for a job.
How many industrial machinery mechanics jobs are open in Nashville?
24 open
24 open, 6 of them new this week, at 20 companies: see them all.
More jobs like this
Process Mechanic-Multi Skilled
Save to applyMaintenance Operator B
Save to applyIndustrial Maintenance Reliability Technician
Save to applyMaterial Handling Equipment Technician II
Save to apply
See all 24 Industrial Machinery Mechanics jobs in Nashville
A search agent finds the jobs this list misses: the ones that mean the same without the same words. Have Destava watch for industrial maintenance technician jobs in USA, Selmer, TN, new matches every morning on your own account.
With Destava: Save to apply · Tailor my résumé · Write a cover letter
This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA.