R&D Technician II – Microscopy and Ceramography
CoorsTek is hiring for R&D Technician II – Microscopy and Ceramography in Golden, CO. Mid level, $22.84 an hour stated. First seen November 13, 2026; open as of November 19, 2026. Jobs taken straight from company career pages — no aggregator in between.
Save to applyFree forever. No commitment, no card required.
- Company
- CoorsTek
- Where
- Golden, CO
- Level
- Mid
- Pay stated
- $22.84 an hour
- First seen
- November 13, 2026
- Listed via
- Workday
- Open for
- 6 days, as of November 19, 2026
Applying to this one?
See how well you fit, before you apply
Save it to your board. Add your résumé once, and Destava shows where you are strong, what is missing and how to pitch yourself, then tailors your résumé to this posting.
- Found it
- Save it
- See your fit
Free forever. No commitment, no card required.
About this job
This position involves preparing and analyzing ceramic and related material samples for microscopy and ceramography, supporting R&D, production, quality, and failure analysis. The technician works with limited oversight, handling sample prep, imaging, and measurements while adhering to safety and quality protocols. Located in Golden, CO, the hourly wage ranges from $22.84 to $27.62.
Responsibilities
- Prepare, image, and assess ceramic and related material samples for R&D, production, quality, and failure analysis.
- Conduct ceramographic sample preparation using sectioning, mounting, grinding, polishing, etching, thermal etching, or other approved methods.
- Clean and handle prepared samples to avoid contamination or surface damage.
- Prepare ceramic, glass, composite, and other inorganic material samples for optical and scanning electron microscopy.
- Use optical microscopes to capture images, evaluate microstructural features, and support routine material characterization.
- Support SEM activities including sample mounting, coating when applicable, basic imaging, image capture, and documentation.
- Perform routine grain size measurements using approved procedures, image analysis software, and applicable standards.
- Document and communicate microstructural features such as porosity, cracks, inclusions, defects, secondary phases, abnormal grain growth, surface damage, and preparation artifacts.
- Assist analysts, engineers, and internal customers by preparing samples and collecting images or measurements for technical interpretation.
- Troubleshoot sample preparation, optical microscopy, SEM support, coating, polishing, and image analysis equipment within scope.
- Clean equipment and work areas, perform routine preventative maintenance, and ensure safe operation of microscopy and ceramography equipment.
- Work independently on assigned tasks while escalating non-routine technical issues appropriately.
- Support continuous improvement by identifying enhancements to sample prep quality, imaging consistency, measurement repeatability, workflow efficiency, equipment use, or safety.
- Collaborate with analysts, engineers, technicians, and internal customers to ensure accurate sample preparation and documentation, minimizing rework.
- Cross-train on related laboratory equipment and microscopy preparation processes as needed to support department priorities.
- Adhere to customer specifications, quality requirements, laboratory procedures, and safety standards.
Requirements
- High school diploma or equivalent plus 3 years of related experience, or Bachelor's degree with 1 year of related experience.
- Intermediate math and writing skills are necessary.
- Basic statistics knowledge is required.
- Ability to follow work instructions, sample prep requests, lab procedures, and customer requirements.
- Capability to produce basic technical notes, sample prep records, imaging documentation, and measurement summaries.
- Perform routine measurements with attention to method consistency, traceability, and data quality.
- Possess practical troubleshooting skills for sample prep, polishing, imaging, and measurement equipment.
- Must be organized, detail-oriented, safety-focused, and able to manage multiple priorities.
- Must work effectively with diverse individuals from various cultures and backgrounds.
- Demonstrate cooperation and communication skills for team environments and internal customer support.
- Always wear appropriate personal protective equipment in work areas.
- Work around sectioning saws, grinding and polishing equipment, rotating platens, sharp samples, brittle fragments, polishing media, and ceramic dust.
- Handle hazardous chemicals such as acids, solvents, etchants, cleaning agents, mounting materials, or polishing compounds.
- Work with high-temperature equipment for thermal etching or sample preparation.
- May need to wear a respirator; medical evaluation required before fitting.
- May need to lift up to 50 lbs.
- May need to sit or stand for extended periods during microscopy, sample prep, image analysis, and equipment operation.
Nice to have
- Technical training, trade school coursework, laboratory coursework, or microscopy/materials-related training is preferred.
- Experience in laboratory, microscopy, materials testing, ceramics, manufacturing, quality, or R&D environments is preferred.
- Experience with metallographic or ceramographic sample preparation is strongly preferred.
- Experience with grinding, polishing, mounting, sectioning, etching, or preparing samples for microscopy is preferred.
- Experience using optical microscopes, SEM systems, image analysis software, or related characterization equipment is preferred.
- Experience with grain size measurement, porosity measurement, defect documentation, or other image-based measurements is preferred.
- Experience with equipment maintenance, basic troubleshooting, and laboratory documentation is preferred.
- Understands basic ceramic science and microstructural concepts including grain structure, porosity, cracks, defects, inclusions, and preparation artifacts.
- Understands material handling for brittle materials, including chipping, cracking, edge retention, contamination, and surface preparation quality.
- Able to use optical microscopy, image capture software, image analysis tools, and basic computer systems for departmental functions.
Read more and apply on CoorsTek's site
Questions about this job
When was this R&D Technician II – Microscopy and Ceramography job at CoorsTek posted?
November 13, 2026
Destava first saw it on November 13, 2026, on CoorsTek's own careers page (Workday).
Is CoorsTek still accepting applications for it?
Open as of November 19, 2026
It was open on CoorsTek's own site when Destava last read it, on November 19, 2026, 6 days after we first saw it. When the company takes it down, this page says the job has closed.
How do I apply for R&D Technician II – Microscopy and Ceramography at CoorsTek?
On CoorsTek's own site
On CoorsTek's own site, at coorstek.wd1.myworkdayjobs.com: open the posting. Destava does not take the application. Save the job to your Destava board to track it, see how well you fit and tailor your résumé to it.
Is this CoorsTek job posting legit?
Listed on CoorsTek's own careers page
Destava read it on CoorsTek's own careers page at coorstek.wd1.myworkdayjobs.com, run on Workday, not on a job board. First seen November 13, 2026. Apply on the company's own site, and never pay to apply for a job.
What does this job pay?
$22.84 an hour
The posting states $22.84 an hour.
How many engineering technologists and technicians, except drafters, all other jobs are open in Denver?
29 open
29 open, 5 of them new this week, at 23 companies: see them all.
More jobs like this
Laser Technician
Save to applyLaser Technician
Save to applyEquipment Engineering Intern
Save to applyHigh Temperature Composites Engineer (Onsite)
Save to apply
See all 29 Engineering Technologists and Technicians, Except Drafters, All Other jobs in Denver
A search agent finds the jobs this list misses: the ones that mean the same without the same words. Have Destava watch for r&d technician ii – microscopy and ceramography jobs in Golden, CO, new matches every morning on your own account.
With Destava: Save to apply · Tailor my résumé · Write a cover letter
This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA.