Maintenance Technician III
Cambro Manufacturing Company is hiring for Maintenance Technician III in Mebane, NC. Senior level. First seen November 13, 2026; open as of November 19, 2026. Jobs taken straight from company career pages — no aggregator in between.
Save to applyFree forever. No commitment, no card required.
- Company
- Cambro Manufacturing Company
- Where
- Mebane, NC
- Level
- Senior
- First seen
- November 13, 2026
- Listed via
- Workday
- Open for
- 6 days, as of November 19, 2026
Applying to this one?
See how well you fit, before you apply
Save it to your board. Add your résumé once, and Destava shows where you are strong, what is missing and how to pitch yourself, then tailors your résumé to this posting.
- Found it
- Save it
- See your fit
Free forever. No commitment, no card required.
About this job
This role focuses on keeping production machinery running through repairs, preventive care, and upgrades at a temperature-controlled North Carolina facility. It reports to the Senior Maintenance Tech Supervisor and works first shift, with overtime possible. The job involves hands-on mechanical, electrical, and automated equipment work.
Schedule: First shift, with overtime as needed and possible schedule changes.
Responsibilities
- Clean, take apart, replace, and fix broken machines or their electrical, mechanical, hydraulic, and pneumatic parts by hand.
- Find what's wrong by watching machines closely, using test tools, and knowing how they work.
- Do scheduled preventive maintenance on time.
- Set up, assemble, install, and maintain pipes, hydraulic and pneumatic gear, and material-moving equipment.
- Install, program, or repair automated machines like robots and programmable controllers.
- Use shop machines like drill presses, grinders, mills, and lathes to make and fix parts.
- Check and measure parts for wear, misalignment, or other issues.
- Weld and cut using MIG/TIG/stick welders, oxy/acetylene, plasma torch, and other cutting tools.
- Look at, touch, and listen to machines to find what's causing problems.
- Read, change, or create blueprints, ladder logic, and electrical, hydraulic, and pneumatic diagrams to fix machines.
- Use forklifts, hoists, chains, straps, or slings to move equipment.
- Keep tools, parts, materials, and the work area clean and cared for.
- Act as a contact with vendors when needed.
- Show up on time and reliably to meet department and company needs.
- Do every essential task well to succeed in the role.
- Follow all safety rules, wear required protective gear, attend safety meetings, and report unsafe conditions.
- Work well with others, give and take feedback, and treat everyone with respect.
- Own your work and behavior, accept accountability, suggest solutions, and update others on progress.
- Meet all department quality standards and raise concerns to the manager.
- Understand and show Cambro's culture and core values: Safety, Quality, Respect, and Service.
- Know the department's performance targets and help reach them alone and with the team.
- Do other tasks as needed.
- Start and lead machine changes and improvements.
- Fix or replace variable frequency and servo drives, motors, and positioning/feedback parts.
- Start purchase requests for parts, services, or machines.
- Teach others how to set up machines or robots and run them manually or automatically to check for issues.
- Mentor new employees and other techs on policies, repair methods, and new equipment.
- Spot and report possible equipment failures or unsafe conditions to the supervisor and help find fixes.
- Log all repairs and solutions in a CMMS database.
- Help create and update preventive and corrective maintenance procedures and checklists for all production equipment.
Requirements
- Two or four-year college or technical school certificate, or ten to fifteen years of related experience in industrial manufacturing, or a mix of education and experience.
- Eight to ten years of preventive or corrective maintenance in injection molding, compression molding, composite molding, or roto mold manufacturing.
- Read and understand mechanical, electrical, and hydraulic prints or schematics, safety rules, operating and maintenance instructions, and procedure manuals.
- Write routine reports and correspondence, and speak effectively to groups of customers or employees.
- Work with math like probability, statistical inference, plane and solid geometry, and trigonometry.
- Apply fractions, percentages, ratios, and proportions to real situations.
- Solve practical problems with limited standardization and handle various concrete variables.
- Follow instructions given in writing, orally, in diagrams, or as schedules.
- Handle physical demands: sitting, walking, standing, bending at neck and waist, squatting, climbing, kneeling, crawling, twisting at neck and waist, repetitive hand use, simple and power grasping, fine manipulation, pushing and pulling, reaching above and below shoulder, and carrying/lifting up to 5
- Drive cars, trucks, forklifts, and other equipment.
- Work around machinery and equipment.
- Handle exposure to loud noise, dust, gas, fumes, chemicals, heights, uneven ground, and bio-hazards like bloodborne pathogens, sewage, or hospital waste.
- Use special visual or auditory protective equipment and operate foot controls or repetitive foot movement.
- Wear safety glasses, utility gloves, steel-toe slip-resistant shoes, hardhat, hearing protection, face shields, and a face mask per company policy.
- Be authorized to work for any employer in the U.S. (no visa sponsorship).
Nice to have
- Experience with Haitian 2 and 3 platen injection molding machines, JSW hydraulic or electric injection molding machines, Husky Hydraulic injection machines, blow molding machines, and Uniloy Structal Web Molding machines.
- Experience with Star and Yushin robots.
- Experience with Ferry rotational molding machines.
- Experience with compression press molding machines.
- Experience with Martin Pultution molding machine.
- Experience with Conair, Universal Dynamics (Una-Dyn), and Matsui Dryer material handling equipment.
- Training or certification in operating forklifts, scissor lifts, and boom lifts.
Read more and apply on Cambro Manufacturing Company's site
Questions about this job
When was this Maintenance Technician III job at Cambro Manufacturing Company posted?
November 13, 2026
Destava first saw it on November 13, 2026, on Cambro Manufacturing Company's own careers page (Workday).
Is Cambro Manufacturing Company still accepting applications for it?
Open as of November 19, 2026
It was open on Cambro Manufacturing Company's own site when Destava last read it, on November 19, 2026, 6 days after we first saw it. When the company takes it down, this page says the job has closed.
How do I apply for Maintenance Technician III at Cambro Manufacturing Company?
On Cambro Manufacturing Company's own site
On Cambro Manufacturing Company's own site, at cambro.wd5.myworkdayjobs.com: open the posting. Destava does not take the application. Save the job to your Destava board to track it, see how well you fit and tailor your résumé to it.
Is this Cambro Manufacturing Company job posting legit?
Listed on Cambro Manufacturing Company's own careers page
Destava read it on Cambro Manufacturing Company's own careers page at cambro.wd5.myworkdayjobs.com, run on Workday, not on a job board. First seen November 13, 2026. Apply on the company's own site, and never pay to apply for a job.
How many maintenance and repair workers, general jobs are open in Raleigh–Durham?
247 open
247 open, 104 of them new this week, at 129 companies: see them all.
More jobs like this
Maintenance Technician III - Asheboro
Save to applyMaintenance Technician II - Reedy Fork
Save to applyMaintenance Technician III - Reedy Fork
Save to applyMaintenance Technician, Multifamily
Save to apply
See all 247 Maintenance and Repair Workers, General jobs in Raleigh–Durham
A search agent finds the jobs this list misses: the ones that mean the same without the same words. Have Destava watch for maintenance technician iii jobs in Mebane, NC, new matches every morning on your own account.
With Destava: Save to apply · Tailor my résumé · Write a cover letter
This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA.