Machine Operator I
Cambro Manufacturing Company is hiring for Machine Operator I in Huntington Beach, CA. Junior level, $19.72–$20 an hour stated. First seen November 13, 2026; open as of November 19, 2026. Jobs taken straight from company career pages — no aggregator in between.
Save to applyFree forever. No commitment, no card required.
- Company
- Cambro Manufacturing Company
- Where
- Huntington Beach, CA
- Level
- Junior
- Pay stated
- $19.72–$20 an hour
- First seen
- November 13, 2026
- Listed via
- Workday
- Open for
- 5 days, as of November 19, 2026
Applying to this one?
See how well you fit, before you apply
Save it to your board. Add your résumé once, and Destava shows where you are strong, what is missing and how to pitch yourself, then tailors your résumé to this posting.
- Found it
- Save it
- See your fit
Free forever. No commitment, no card required.
About this job
This is a second-shift Machine Operator I role in Huntington Beach, CA, operating either a 330 Ferry 11/12 or 220 Ferry platform machine. You are responsible for the machine's safety, efficiency, quality, and productivity, plus related tasks like mold changes and housekeeping. The job requires working overtime and being flexible with schedule changes.
Schedule: Second Shift (United States of America); overtime as needed and flexible to schedule changes.
Responsibilities
- Ensure the team has all required safety equipment.
- Check that all equipment, molds, machines, and hoists work properly and report any issues immediately.
- Follow a schedule and enter data into the Prism Information System.
- Set up and start molds as required.
- Ensure machines produce quality parts to required standards.
- Maintain a good cycle rating per company cycle standards.
- Report any machine function deviations to the lead for correction by a Maintenance Mechanic.
- Prepare molds in advance to ensure efficient changeovers.
- Fill out mold P.M. sheets and attach them to molds.
- Perform all tasks for scheduled mold changes, including changes for testing new or recently worked molds.
- Set rotation and cycle time on the machine computer; order or bring over cooling jigs; fill out P.M. sheet on returning mold; ensure cooling jigs are returned to their location.
- Coordinate mold changes to minimize downtime by bringing over or having brought over mold extensions, tools, and supplies before starting the change.
- Be flexible to complete mold changes in progress at the end of your shift.
- Coordinate and participate in color and material changes to minimize downtime.
- Perform minor maintenance as required, such as changing leaky hoses and replacing broken fittings.
- Keep machines and surrounding areas clean and orderly during and at the end of your shift.
- Eliminate safety hazards you are able to correct.
- Monitor molds and machines for proper operation.
- Run molds to department cycle and weight standards.
- Get assistance to correct problems if necessary.
- Troubleshoot processing problems as they arise.
- Keep accurate records of cycle data, part weights, cycle times, rejects, and assigned process check sheets.
- Assist in day-to-day production efforts in your designated cell.
- Maintain reliable and consistent attendance, including punctuality and dependability.
- Execute each essential duty satisfactorily to perform the job successfully.
- Follow all safety procedures, wear PPE as needed, attend all safety meetings, and report safety issues.
- Perform effectively as a team member, work well with others, give and receive feedback, and treat everyone with respect.
- Take ownership of your work and behavior, accept accountability, encourage solutions, and communicate work status.
- Follow all department quality standards and raise concerns to your immediate manager.
- Understand and demonstrate Cambro company culture and core values (Safety, Quality, Respect, Service).
Requirements
- High school diploma or GED, and one year of related experience or training, or equivalent combination of education and experience.
- Ability to communicate in English verbally and in writing, and comprehend instructions.
- Ability to read and interpret documents such as safety rules and procedure manuals.
- Ability to add, subtract, multiply, and divide in all units of measure using whole numbers, common fractions, and decimals.
- Very good knowledge of Rotational Molding and Mold Set Up processes on either the Ferry 330 or Ferry 220 machines.
- Very good understanding of rotational molds, materials, and machinery.
- Ability to sit, walk, stand, bend at neck and waist, squat, climb, kneel, crawl, twist at neck and waist, use hands repetitively, simple and power grasping, fine manipulation, push and pull, reach above and below shoulder, and carry/lift up to 50-75 lbs.
- Ability to drive cars, trucks, forklifts, and other equipment.
- Ability to work around equipment and machinery.
- Ability to work in excessive noise.
- Ability to work with dust, gas, fumes, or chemicals.
- Ability to work at heights.
- Ability to use special visual or auditory protective equipment.
- Ability to walk on uneven ground.
- Ability to operate foot controls or repetitive foot movement.
- Ability to work with risk of exposure to bio-hazards such as bloodborne pathogens, sewage, hospital waste, etc.
- Wear PPE: safety glasses, utility gloves, steel-toe slip-resistant shoes, hardhat, hearing protection, face shields, and face covering (mask) per company policy.
- Must be authorized to work for any employer in the U.S.; sponsorship not available.
Nice to have
- ERP system experience with Prism, Intermec, and/or AS400 system.
- Bilingual in Spanish.
- Forklift certified.
Read more and apply on Cambro Manufacturing Company's site
Questions about this job
When was this Machine Operator I job at Cambro Manufacturing Company posted?
November 13, 2026
Destava first saw it on November 13, 2026, on Cambro Manufacturing Company's own careers page (Workday).
Is Cambro Manufacturing Company still accepting applications for it?
Open as of November 19, 2026
It was open on Cambro Manufacturing Company's own site when Destava last read it, on November 19, 2026, 5 days after we first saw it. When the company takes it down, this page says the job has closed.
How do I apply for Machine Operator I at Cambro Manufacturing Company?
On Cambro Manufacturing Company's own site
On Cambro Manufacturing Company's own site, at cambro.wd5.myworkdayjobs.com: open the posting. Destava does not take the application. Save the job to your Destava board to track it, see how well you fit and tailor your résumé to it.
Is this Cambro Manufacturing Company job posting legit?
Listed on Cambro Manufacturing Company's own careers page
Destava read it on Cambro Manufacturing Company's own careers page at cambro.wd5.myworkdayjobs.com, run on Workday, not on a job board. First seen November 13, 2026. Apply on the company's own site, and never pay to apply for a job.
What does this job pay?
$19.72–$20 an hour
The posting states $19.72–$20 an hour.
How many extruding, forming, pressing, and compacting machine setters, operators, and tenders jobs are open?
328 open
328 open, 132 of them new this week, at 174 companies: see them all.
More jobs like this
P.M. Machine Tender (Toast)
Save to applyHot Press Operator Night Shift
Save to applyManager (m/w/d) Validation Großpackenpressen & Rundballenpressen
Save to applyGépkezelő (Pellet üzem)
Save to apply
A search agent finds the jobs this list misses: the ones that mean the same without the same words. Have Destava watch for machine operator i jobs in Huntington Beach, CA, new matches every morning on your own account.
With Destava: Save to apply · Tailor my résumé · Write a cover letter
This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA.